Hub 3.0 Settings Password Not Working(Solutions)

The Virgin media hubs works as the modem as well as the router. One of them is Hub 3, with which a user is struggling to log in its settings, because the password isn’t working. In this type of situation, there will be mainly two reasons behind it:

• User have forgotten Hub settings password, which can be access from the computer or laptop.
• The other reason will be the hub is not connected to your computer. Because it is compulsory to connect with the same network to reach the login page.

Now, have a look at some solutions to the solve the above mentioned issue right away;

Solutions: Hub Password Not Working

You should apply these solutions to fix above mentioned issue, for sure user have tried, rebooting or resetting the device, but use these tips as well;

Check Computer Linked to Same Network

The Virgin media settings will open up in your computer when it is connected to the Virgin media device. So, check that your internet device is connected to the Virgin Media hub via LAN cable or SSID. Also use the IP address 192.168.0.1 to reach the Virgin media hub login page on your internet device.

Reset or Hard Reset Hub 3 to Set Default Details

For sure, user has tried the reset process to dispel the problem, but if you have facing the issue again, then you can try this given procedure;

• You must factory reset (60 seconds) to fix the Hub 3.0 settings password not working.
• This action will reset the admin credentials and WiFi password to default one.
• Then you can easily connect with the Hub 3 and reach to the hub settings, adjust all recommended settings.
• To reset, just press and hold the RESET button for 60 seconds and leave the hub for half an hour.



After resetting the device, you just have to use the default WiFi password to connect and use the default admin credentials to reach the settings.

You can also use these tips to solve the Virgin hub 5 keeps disconnecting issues.

The Conclusion

Here, you have seen and learned about how to solve the Virgin media Hub 3.0 settings password not working. We have shared all the majorly use solutions tips to fix the problem.