How to Access Virgin Router Settings?

Virgin Media router hub has so many features that you can easily access through its web GUI (Interface) utility. But, first you have to connect it to your home network.

To establish virgin router hub in your home, just use the Ethernet cable. Connect your modem LAN port to the router WAN port with the help of the cable.

Then you can configure the router by accessing the interface of the Virgin device. Here, we will provide information and instructions about how to access Virgin router settings and how you can change them.

There are two ways to access the settings, which are in normal router mode and other when it is in modem only mode.

Access Virgin Media Routers Settings

To access the Virgin WiFi router hub settings, just connect your internet device (computer or laptop) to the router network. Then, follow some below given steps.

• Find and launch updated web browser on your internet device.
• Type IP address in the address bar like https //192.168.l.0.1 Virgin and hit the Enter button.
• Virgin IP will take you to the login page, where you have to type in settings password.
• To find Settings password, you have to look at the router label at the back.
• Enter the password and click on the Log In button to access Virgin router settings.

Now, let’s see how to access the router settings if your router is working in the modem-only mode.

Reach Virgin Router Settings in Modem-Only Mode

At first, you need to understand what modem-only mode is. Then we will provide instructions to reach the Virgin router settings.

Virgin Modem-Only Mode

Modem-only mode use when you have connected your Virgin WiFi router hub to third party router like mesh system or normal router.

By using this mode, WiFi just provides internet connection to the new router through the Ethernet cable. In this mode, the Virgin router will go off.

So, if you want to log into Virgin router interface (when it is in Modem-Only mode), then you have apply easy steps written down here.

Access Settings in Modem-Only Mode

• In case of Modem-Only mode, you have to use a different IP address which is 192.168.100.1.
• Just connect your computer to the network and search the IP 192.168.100.1 in web browser.
• You will reach a login page, where you have to type the router settings password and click on the Log In button.

Now, you can adjust the settings and explore Virgin router features easily with the help of Virgin Media hub login interface.

Important Note:

In the situation like Modem-Only mode, we recommend that you should disconnect all the Ethernet cable from the router and reboot it once.

Then, connect your computer or laptop to the router with the help of the network cable and start to access Virgin router settings process.

End Thoughts

In this blog post, you have learned how to access Virgin router settings when router is in normal mode. We have also shared information about the Virgin router modem-only mode and instructions to access router settings through your computer or laptop.