Virgin Media Flashing Green Arrows Hub 3 [Solved]

Virgin media routers are networking devices, on which you will find LED lights that will show status of the device.

Here we will discuss about the Virgin media flashing green arrows hub 3. This means the hub 3 device is working but internet access has been denied, which you can see by Virgin media hub login interface page.

Virgin router never gives any access credentials to its internet signals. So, let’s see what are the reasons and solutions to the mentioned problem.

Why Virgin Hub 3 Flashing Green Arrows?

There can be several reasons why you can face this type of problem. Let’s list up possible causing factors down here.

• Hub 3 is placed close to internet interruption area where you have placed electronic devices.
• Connection between the Hub and modem or ISP server can be weak or incorrect.
• Damaged cables like Ethernet cable or power cord connected to the hub 3 device.
• Hardware or interface issue, in this situation you have to take help from technical support of Virgin media.
• Wrong configuration of the Hub 3 from the interface can also be a reason of Virgin Media flashing green arrows Hub 3.

So these were the possible reasons why your hub 3 not receiving internet connection. Now, have a look at troubleshooting tips and solutions given down here.

How to Fix Hub 3 Flashing Green Arrow Issue?

Here in this section, you will get to know about how to fix the flashing green arrow issue in hub 3. We wills share top six tips and solutions to dispel the problem.

Disconnect Damaged Cables

You must check all the cables connected to the Virgin media hub like Ethernet cable or power cord. Damaged cables can interrupt signals and trouble you with Virgin router not working problem. So, disconnect the damaged cables and replace them with new ones.

Connect Router to Modem Correctly

Modem can connect with the Virgin hub 3 with the help of Ethernet cable. You must be sure that you have connected the cable to the correct ports. The right port selection is WAN port of the hub and LAN port of the modem.

Access Interface to Find Cause

You can find out the obvious reasons why you are seeing Virgin Media flashing green arrows Hub 3. Just access the interface through your computer via IP address 192.168.0.1. Then, find the cause from the interface window.

Reboot Virgin Media Hub 3

In most of the cases, this type of above mentioned problem solved by rebooting the hub device. So let’s try it once. To reboot the device, find the power button on the router and press it to turn off, then press it again to complete the restart process.

Reset Media Router

If the problem is not solving then the last option to dispel the problem is resetting the device. To reset the devices, you have to find and long press the reset button with the help of a pin.

By resetting the router, all the setting and credentials will be deleted. It means, you have to reconfigure the hub 3 model by access the Virgin router settings through 192.168.0.1 via your computer.

Call for Technical Support

There could be serious hardware or interface issue your device. To fix you can call for the technical support. The support will listen to your problem and provide a technical team to visit your home. They will check your device and will solve Virgin media flashing green arrows Hub 3 problem.

Conclusion

Here, you have seen reasons and solutions to solve the Virgin Media flashing green arrows hub 3 problem. We have provided meanings, possible causing factors and some potential solutions to fix teh mentioned issue.